DYNAUDIO : EMIT M-15C (SATIN WHITE)
Complete your home theatre set-up in style
This ultra-compact centre-channel is the ideal complement to your multichannel system
It’s been said that up to 80% of the movie-watching experience is down to its sound. And when you’re watching a movie using a surround-sound system, most of it comes from the centre channel. We’ve made sure the M15C can live up to that kind of pressure. Two 11cm MSP drivers and a 28mm soft-dome tweeter handle the business end, while the angled centre base lets you position the speaker for listening on a sofa. You can also put it flat on a low sideboard, or fix it to the wall with a special Dynaudio mounting bracket.
Emit – A True Dynaudio Experience
For nearly 40 years, we have developed and built our own loudspeaker drivers. We believe the only way to create a truly exceptional loudspeaker is to have control over the entire process –to fiddle with, and calibrate every single part.
The entry-level series of Emit loudspeakers is no different. We use our own drive units built with technologies that have proven themselves in speaker after speaker, review after review. We use the same sense of craftsmanship; the same sense of quality as with any of our speakers. Each drive unit is handcrafted right here in Skanderborg, Denmark. And guess what, the very same people who worked on the Evidence Platinum also worked on the Emit.
In the Emit series, we wanted to offer the best driver technology we could, so when we were developing the series, we looked to technologies that had proven themselves time and time again.
High-end Tweeter, Entry-Level Series
The tweeter is a D280. And while that might sound unfamiliar, it truly has a rich heritage. That’s because the D280 is based on the renowned and critically acclaimed D260 – which was used in many loudspeakers higher up the food chain at the time.
To recreate high frequencies (that’s the tweeters job), the D280 uses a silk soft-dome tweeter with our precision coating – both our domes and coating have been continuously developed and updated over the years to deliver the superb high frequency performance we are known for.
As with any of our other speaker, the Emit loudspeakers uses woofers made with our proprietary composite of Magnesium Silicate Polymer (we usually just call it MSP for short).
The thing with MSP is that the combination between low mass, high rigidity, and an ideal amount of internal damping ensures an extremely high level of consistency as the loudspeaker moves across the different frequency ranges. By having such high levels of consistency, we avoid emphasizing or understating any element in the sound reproduction for a truly authentic experience of the music.
We fine-tune everything. Calibrate every single part to match all of the others. And this tuning is done by the very same people who meticulously tuned the celebrated Evidence Platinum loudspeakers. In the final development stage of the Emit, they spent many hours listening, tweaking, adjusting. Making sure that every bit of the loudspeaker sounds its best.
In the end, we are left with an entry-level series developed and built with the same attention to detail and passionate craftsmanship as we’ve come to be recognized for around the world – an entry-level series in high-end audio that truly captures the Dynaudio experience.
|Sensitivity:||86dB (2,83V / 1m)|
|IEC Power Handling:||> 150W|
|Frequency response (±3dB):||60Hz – 23kHz|
|Box principle:||Bass Reflex Rear Ported|
|Crossover Topology:||1st/2nd order|
|Woofer:||2 x 11cm MSP|
|Tweeter:||28mm soft dome|
|Weight:||7kg / 16lb|
|Dimensions (W x H x D):||500 x 142 x 200mm|
|19.7 x 5.6 x 7.9in|
|Dimensions with feet/grill (W x H x D):||500 x 180 x 215mm|
|19.7 x 7.1 x 8.3in|