Product Best Budget 2 Channel OCTAVE V 80 SE+ Response D48R (CHERRY)
OCTAVE
OCTAVE :
V 80 SE+ RESPONSE D48R (CHERRY)
Category : Best Budget 2 Channel
Add to wishlist     สถานะสินค้า In Stock
V 80 SE+ Response D48R (CHERRY)
V 80 SE+ Response D48R (CHERRY)
V 80 SE+ Response D48R (CHERRY)
V 80 SE+ Response D48R (CHERRY)
V 80 SE+ Response D48R (CHERRY)
V 80 SE+ Response D48R (CHERRY)
V 80 SE+ Response D48R (CHERRY)
 
PRICE :
791,900 THB.
SPECIAL :
779,900 THB.
ฟรีค่าขนส่ง
 
Octave Super Black Box มูลค่า 124,900
สอบถามสินค้า 02-103-1289,02-040-4229 เพิ่มเติม...
จำนวน เซ็ท

  • Overview
  • Features
  • Specifications

OCTAVE : V 80 SE, The Sovereign
Stereo 2 X 75 watt/4 ohm

The V 80 line level integrated amplifier is a completely new development, with the output stage based on the concept of the OCTAVE MRE 130 mono amplifier. His outstanding characteristic is an unbelievably melodic timbre and his unshakable performance. He reproduces any music with authority and natural elegance, instantly captivating the listener. Fundamental notes, warmth, three-dimensionality and speed, the V 80 plays music effortlessly and with pure joy.

“Watt is not the same as Watt“: At dynamic peaks, when other amplifiers begin to collapse, the V 80 truly comes to life. It is not without reason that the V 80 won the highly respected “Jazz Component Award” in Japan (as the best overseas component) in 2008 and next the Pure Audio Grand Prix Award in 2009.

The V 80 transcends far beyond the technical and tonal attributes of the V 40SE and V 70SE integrated amplifier models, and performs without peer in its own exalted league. He is built for listeners who don’t want to install big pre- and power amplifier combinations, but who have the highest expectations and requirements regarding sound quality and system functionality.
As the top of the line OCTAVE integrated amplifier offering, the V 80 contains all the features modern entertainment equipment requires for convenience and connectivity..

Basic Model V 80 Line, optional Phono MM or MC
Tube Complement 4 x 6550 or optional KT 88
Design Aluminium silver or Aluminium black
Add On Modules Black-Box and Super Black Box

In – and Outputs
The V 80 features a total of seven single-ended (RCA) inputs - including the Home Theatre Bypass input) and one balanced (XLR) input. One RCA input can fitted with the optional (either MM or MC) Phono Input Board. Outputs included are one RCA Record output, one regulated Preamplifier output, one Headphone output and one Loudspeaker output. The V 80 is equipped with a separate Headphone Amplifier, and the Loudspeaker and Headphone outputs can be switched independently. The pre- and power amplifier sections of the V 80 can be operated independently from each other as well.

Black Box Connector
OCTAVE, with the Black Box technology, offers an upgrade path for optimizing the OCTAVE amplifier in respect to the speaker. This flexibility is a unique feature of the OCTAVE brand.

The dynamic and tonal stability of an amplifier is strongly dependent upon the stability and capacity of the power supply, therefore the Black Box and Super Black Box were developed as external upgrades to the OCTAVE amplifiers’ power supply storage capacitors by increasing their capacitance by a factor of 4 (Black Box) or 10 (Super Black Box), respectively. This is a tremendous benefit if the speaker is difficult to drive. Loudspeaker efficiency is made less critical, while the amplifier is enabled to handle speakers with extremely low minimum impedances.

Ecomode
A forward looking feature of OCTAVE is the unique Ecomode power saving electronic circuitry developed to reduce heat and unnecessary power consumption when the amplifier is switched on but not in use. This electronic system controls the power condition and reduces power consumption when the amplifier does not receive a signal for a period exceeding 10 minutes. In this “sleep” mode, the V 80 draws only 20 W idle current. Virtually no heat is produced by the unit, and the heater voltage and the high voltage for the power amplifier section are switched off. When a signal is detected by the V 80, the Ecomode circuit will turn the amplifier back on, with a warm-up/start-up delay of approximately 30 seconds before the unit will operate. Ecomode also serves to increase the lifetime of the tubes, while having an added benefit of improved safety allowing the V 80 owner a level of security against any problems when leaving the unit powered on.

BIAS Adjustment
The Output stage of the V 80 operates in Class A/B, and therefore requires an adjustable BIAS regulation. The highly sophisticated yet extremely simple yet accurate BIAS calibration system is accessed on the front panel of the unit. It utilizes external precision bias trim pots and LED confirmation, allowing the user to readily monitor the output tubes and simply correct their bias individually at the front panel - without the need of a micrometer let alone any special knowledge or tools.

The correct BIAS is vital for the constant sound quality of the V 80. Due to this facility there is no need for a technician to service the V 80 for changing or tubes or to check their condition. The precision of this user friendly system is within 0.5% accuracy.

Power Management and Protection System
The V 80 is equipped with a multi-stage Soft-Start/Turn-On protection circuit which extends component as well as tube life considerably by protecting against stress caused by typical high inrush currents during switch-on. The unit starts in a defined sequence, with the Protection System monitoring the V 80 completely, and activated whenever a malfunction is detected. Once the Protection is activated, the V 80 is powered down.

Optional Phono Stage
An internal Phono Stage is available on the V 80 for either MM (47k Ohm) or MC (500 Ohm) cartridges. The phono board includes a 12 dB / Octave sub-sonic filter. The design of the internal Phono Stage is based on passive equalization for the best signal conditioning.

Power Output 2 x 75 W continuous, 80 W Peak into 4 Ohm
Frequency Response 10 Hz - 80 kHz / ± 0,5 dB
Total Harmonic Distortion < 0,1% @ 10 W into 4 Ohm
Signal-to-Noise Ratio > 100 dB
Minimum Speaker Impedance 2 Ohm
Connections 1 x XLR, 6 x Cinch, (1 x Phono, 1 x Home Theatre pass-through)
Preamplifier  
Input Sensitivity 230 mV Cinch + XLR
Input Impedance 40 kOhm Cinch; 25 kOhm XLR
Channel Balance 0,5 dB bis - 70 dB from Volumeadjuster
Left/Right Crosstalk 60 dB
Phono  
Input Impedance MC 500 Ohm, MM 47 kOhm
Signal-to-Noise Ratio MC 75 dB, MM 90 dB
Input Sensitivity MC 0.5 mV, MM 4 mV
Subsonic Filter -12dB/ oct. 20Hz corner frequency
General Facts  
Power Consumption < 20 W Ecomode, 160 W idle, 400 W at full power
Weight 23 kg
Main Fuse 230/240 V Mains: 3,15 A slow-blow typ
Dimensions (in mm)  
วิธีการชำระเงิน