ACCUSTIC ARTS : AMP I MK2
Audiophile stereo power amplifier with high output performance
AMP I - MK2 highlights
- Audiophile stereo power amplifier with high output performance; also suitable for less efficient, impedance critical and low ohm loudspeaker systems down to 2 Ω
- 8 selected MOS-FET output transistors of finest quality
- Magnetically shielded and encapsulated 600 VA toroidal core transformer for high output reserves; separate windings for right and left channel
- Very good smoothing thanks to more than 80.000 μF power supply capacity; premium quality capacitors (“Made in Germany”)
- High damping factor for perfect speaker control
- Integrated protective circuit switches ascents off when clipping, HF oscillations or too high DC offset occurs
- Constant low operating temperature due to generously dimensioned heat sink integrated in housing
- Balanced input (XLR) and unbalanced input (RCA) – the inputs are switchable
- All used components and parts are selected and of highest quality
- Very high quality, gold-plated speaker terminals
- Full metal housing for optimum shielding
- Front panel made of brushed aluminium;
- inlay made of massive, chromed brass
- ACCUSTIC ARTS® AMP I - MK2 is „Handmade in Germany“
Specifications
- Voltage gain: 31.0 dB
- Transformer power: approx. 600 VA (watts)
- Power supply capacity: more than 80,000 μF
- Input impedance: balanced (XLR): 2 x 20 kΩ
- unbalanced (RCA): 28 kΩ
- Rated power output: 2 x 210 watts on 4 Ω
- (THD+N = 0.1 %) 2 x 140 watts on 8 Ω
- Rise time / fall time: 3.6 μs with 4 Ω load
- (square-wave 20 kHz, 12 Vpp)
- Signal-to-noise-ratio: -98 dBA (ref. 6.325 V)
- Intermodulation
- distortion: 0.00019 % with 10 watts on 4 Ω
- Distortion factor: 0.007 % on 4 Ω load with 1 kHz and 10 watts
- (THD+N) 0.004 % on 8 Ω load with 1 kHz and 10 watts
- Damping factor: approx. 670 on 8 Ω
- Dimensions (H x W x D): 145 x 482 x 440 mm / 5.7 x 19 x 17.3 inches
- Weight: approx. 20 kg / 44 lbs