Product Speaker Floor Standing Speakers Dynaudio EMIT M-30 (SATIN BLACK)
Dynaudio
DYNAUDIO :
EMIT M-30 (SATIN BLACK)
Category : Floor Standing Speakers
Add to wishlist     สถานะสินค้า In Stock
EMIT M-30 (SATIN BLACK)
EMIT M-30 (SATIN BLACK)
EMIT M-30 (SATIN BLACK)
EMIT M-30 (SATIN BLACK)
EMIT M-30 (SATIN BLACK)
EMIT M-30 (SATIN BLACK)
EMIT M-30 (SATIN BLACK)
 
PRICE :
69,500 THB.
SPECIAL :
55,900 THB.
ฟรีค่าขนส่ง
 
สอบถามสินค้า 02-103-1289,02-040-4229 เพิ่มเติม...
จำนวน คู่ (Pair)
สินค้าราคาพิเศษ ไม่สามารถใช้คูปองส่วนลดได้
Special price products. The discount coupons cannot be applied

  • Overview

DYNAUDIO : EMIT M-30 (SATIN BLACK)
A true powerhouse


The M30 floorstanders share the same DNA as our top-of-the-line loudspeakers. Their twin 17cm MSP bass drivers each feature a large 75mm aluminium voice-coil (larger voice-coils mean more windings, which means more control over dynamics, detail and finesse), and their 28mm soft-dome tweeters have rear damping chambers for even greater precision. It’s the sort of thing you might expect to see in much higher-priced speakers. And it’s the sort of sound you might expect, too.

The M30s are designed to work just as well in a stereo set-up as they are in a multichannel system.

Emit – A True Dynaudio Experience

For nearly 40 years, we have developed and built our own loudspeaker drivers. We believe the only way to create a truly exceptional loudspeaker is to have control over the entire process –to fiddle with, and calibrate every single part.

The entry-level series of Emit loudspeakers is no different. We use our own drive units built with technologies that have proven themselves in speaker after speaker, review after review. We use the same sense of craftsmanship; the same sense of quality as with any of our speakers. Each drive unit is handcrafted right here in Skanderborg, Denmark. And guess what, the very same people who worked on the Evidence Platinum also worked on the Emit.

In the Emit series, we wanted to offer the best driver technology we could, so when we were developing the series, we looked to technologies that had proven themselves time and time again.

High-end Tweeter, Entry-Level Series

The tweeter is a D280. And while that might sound unfamiliar, it truly has a rich heritage. That’s because the D280 is based on the renowned and critically acclaimed D260 – which was used in many loudspeakers higher up the food chain at the time.

To recreate high frequencies (that’s the tweeters job), the D280 uses a silk soft-dome tweeter with our precision coating – both our domes and coating have been continuously developed and updated over the years to deliver the superb high frequency performance we are known for.

http://staff-p2.piyanas.com/images/20180404/KKDLVEXM_x.jpg

As with any of our other speaker, the Emit loudspeakers uses woofers made with our proprietary composite of Magnesium Silicate Polymer (we usually just call it MSP for short).

The thing with MSP is that the combination between low mass, high rigidity, and an ideal amount of internal damping ensures an extremely high level of consistency as the loudspeaker moves across the different frequency ranges. By having such high levels of consistency, we avoid emphasizing or understating any element in the sound reproduction for a truly authentic experience of the music.

http://staff-p2.piyanas.com/images/20180404/hom1YTH5_x.jpg

We fine-tune everything. Calibrate every single part to match all of the others. And this tuning is done by the very same people who meticulously tuned the celebrated Evidence Platinum loudspeakers. In the final development stage of the Emit, they spent many hours listening, tweaking, adjusting. Making sure that every bit of the loudspeaker sounds its best.

In the end, we are left with an entry-level series developed and built with the same attention to detail and passionate craftsmanship as we’ve come to be recognized for around the world – an entry-level series in high-end audio that truly captures the Dynaudio experience.

 

Technical Specifications
 

Sensitivity: 86dB (2,83V / 1m)
IEC Power Handling: 200W
Impedance: 4 Ohms
Frequency Response (±3dB): 40Hz – 23kHz
Box Principle: Bass Reflex Rear Ported
Crossover: 2 way
Crossover Frequency: 1800Hz
Crossover Topology: 2nd order
Woofer: 2 x 17cm MSP
Tweeter: 28mm soft dome
Weight: 18kg / 40lb
Dimensions (W x H x D): 204 x 960 x 275mm
  8 x 37.8 x 10.8in
Dimensions with feet/grill (W x H x D): 204 x 960 x 290mm
  8 x 37.8 x 11.4in
วิธีการชำระเงิน